Soft/hard armour blueprints

And 2. Ballistic Lower Arm Protector

Number of pieces: 2 large, 2 small for both lower arms

Armour material:hard – flexible ballistic composite panel

Pouch used:no

Fastening mechanism:fastened on top of Damascus FX-1, Flexforce anti-blunt-trauma suit, lower arm piece with 1 out of 3 hard plastic shells. Fastened with 2; 2 cm nylon straps with female/male fastening clips and adhesive hook/loop straps in addition to the two existing straps provided by the FX-1.

Size of armour fabric/material - “W” measuring widest possible position, “H” measuring highest possible position: 1: W: 19 cm, H: 34 cm, 2: W: 10 cm, H: 17 cm

Ballistic Deltoid Protectors

Number of pieces: 2

Armour material:soft - 14 thick or 34 thin layers of Kevlar

Pouch used:yes

Fastening mechanism:Fastened with 1; 4 cm, upper nylon straps (fastened to vest), on lower side fastened around arm with 4 cm nylon strap with hook/loop strap. It is possible to buy these pouches (no soft armour inserts from the US, try ebay etc.)

Size of armour fabric/material -W: 33 cm, H: 31 cm

Ballistic Axillary Protector

Number of pieces: 2

Armour material:soft - 14 thick or 34 thin layers of Kevlar

Pouch used:yes

Fastening mechanism:Fastened with 2; 4 cm nylon straps which is fastened on the inside of your vest with hook/loop material. You should also use a rubber strap on the lower side to connect with acillary protector on the opposite side of the body to ensure a good fit.

Size of armour fabric/material -W: 33 cm,H: 32 cm

Ballistic Neck Protector

Number of pieces: 1

Armour material:soft - 14 thick or 34 thin layers of Kevlar

Pouch used:yes

Fastening mechanism:Fastened on frontal side on the low side of your throat, with 2; 2 cm nylon straps to inside of vest (depending on what type of vest you have, if you lack a neck protector integrated in your vest.

Size of armour fabric/material -W: 25 cm, H: 9 cm

Ballistic Hip/butt Protector

Number of pieces: 1

Armour material:soft - 14 thick or 34 thin layers of Kevlar

Pouch used:yes

Fastening mechanism:Simply buy a Web-tex Hip Pad from f. example polimil.co.uk and cut it in two (splitting it on the mid section and removing one mini-buckle). Then sew it together on the far ends so that it becomes “butt shaped. Then cut out the fill material and replace with layers of ballistic Kevlar fabric, stitch up, dye black and fasten on your belt.Some sewing required.

Size of armour fabric/material -W: aprox 83 cm, H: 10-20 cm

Date: 2015-12-17; view: 846