3. What of the Future and Concerns Surrounding Nanomaterials?...............10-12
4. Conclusion ..13
5. References ..14
International University of Information Technologies
Department of Languages
Research Project Proposal
By: Bilalov Kh.A
Group CSSE 133K
Teacher: Yerkynay Yelubay
I. Research topic: Nanotechnology in Medicine
II. Research Problem / Question: Nanotechnology in Medicine: Huge Potential, But What Are The Risks?
III. Research Hypothesis: Kazakhstan pays little attention to Nanotechnology in Medicine
IV. Research Method: Case Study
What is Nanotechnology?
The prefix "nano" stems from the ancient Greek for "dwarf". In science it means one billionth (10 to the minus 9) of something, thus a nanometer (nm) is one billionth of a meter, or 0.000000001 meters. A nanometer is about three to five atoms wide, or some 40,000 times smaller than the thickness of human hair. A virus is typically 100 nm in size.
The ability to manipulate structures and properties at the nanoscale in medicine is like having a sub-microscopic lab bench on which you can handle cell components, viruses or pieces of DNA, using a range of tiny tools, robots and tubes.
Therapies that involve the manipulation of individual genes, or the molecular pathways that influence their expression, are increasingly being investigated as an option for treating diseases. One highly sought goal in this field is the ability to tailor treatments according to the genetic make-up of individual patients.
This creates a need for tools that help scientists experiment and develop such treatments.
Imagine, for example, being able to stretch out a section of DNA like a strand of spaghetti, so you can examine or operate on it, or building nanorobots that can "walk" and carry out repairs inside cell components. Nanotechnology is bringing that scientific dream closer to reality.
For instance, scientists at the Australian National University have managed to attach coated latex beads to the ends of modified DNA, and then using an "optical trap" comprising a focused beam of light to hold the beads in place, they have stretched out the DNA strand in order to study the interactions of specific binding proteins.
Nanobots and Nanostars
Meanwhile chemists at New York University (NYU) have created a nanoscale robot from DNA fragments that walks on two legs just 10 nm long. In a 2004 paper published in the journal Nano Letters, they describe how their "nanowalker", with the help of psoralen molecules attached to the ends of its feet, takes its first baby steps: two forward and two back.
One of the researchers, Ned Seeman, said he envisages it will be possible to create a molecule-scale production line, where you move a molecule along till the right location is reached, and a nanobot does a bit chemisty on it, rather like "spot-welding" on a car assembly line. Seeman's lab at NYU is also looking to use DNA nanotechnology to make a biochip computer, and to find out how biological molecules crystallize, an area that is currently fraught with challenges.
The work that Seeman and colleagues are doing is a good example of "biomimetics", where with nanotechnology they can imitate some of the biological processes in nature, such as the behavior of DNA, to engineer new methods and perhaps even improve them.
DNA-based nanobots are also being created to target cancer cells. For instance, researchers at Harvard Medical School in the US reported recently in Science how they made an "origami nanorobot" out of DNA to transport a molecular payload. The barrel-shaped nanobot can carry molecules containing instructions that make cells behave in a particular way. In their study, the team successfully demonstrates how it delivered molecules that trigger cell suicide in leukemia and lymphoma cells.
Nanofactories that Make Drugs In Situ
Scientists are discovering that protein-based drugs are very useful because they can be programmed to deliver specific signals to cells. But the problem with conventional delivery of such drugs is that the body breaks most of them down before they reach their destination.
But what if it were possible to produce such drugs in situ, right at the target site? Well, in a recent issue of Nano Letters, researchers at Massachusetts Institute of Technology (MIT) in the US show how it may be possible to do just that. In their proof of principle study, they demonstrate the feasibility of self-assembling "nanofactories" that make protein compounds, on demand, at target sites. So far they have tested the idea in mice, by creating nanoparticles programmed to produce either green fluorescent protein (GFP) or luciferase exposed to UV light.
The MIT team came up with the idea while trying to find a way to attack metastatic tumors, those that grow from cancer cells that have migrated from the original site to other parts of the body. Over 90% of cancer deaths are due to metastatic cancer. They are now working on nanoparticles that can synthesize potential cancer drugs, and also on other ways to switch them on.
Nanofibers are fibers with diameters of less than 1,000 nm. Medical applications include special materials for wound dressings and surgical textiles, materials used in implants, tissue engineering and artificial organ components.
Nanofibers made of carbon also hold promise for medical imaging and precise scientific measurement tools. But there are huge challenges to overcome, one of the main ones being how to make them consistently of the correct size. Historically, this has been costly and time-consuming.
But last year, researchers from North Carolina State University, revealed how they had developed a new method for making carbon nanofibers of specific sizes. Writing in ACS Applied Materials & Interfaces in March 2011, they describe how they managed to grow carbon nanofibers uniform in diameter, by using nickel nanoparticles coated with a shell made of ligands, small organic molecules with functional parts that bond directly to metals.
Nickel nanoparticles are particularly interesting because at high temperatures they help grow carbon nanofibers. The researchers also found there was another benefit in using these nanoparticles, they could define where the nanofibers grew and by correct placement of the nanoparticles they could grow the nanofibers in a desired specific pattern: an important feature for useful nanoscale materials.
Lead is another substance that is finding use as a nanofiber, so much so that neurosurgeon-to-be Matthew MacEwan, who is studying at Washington University School of Medicine in St. Louis, started his own nanomedicine company aimed at revolutionizing the surgical mesh that is used in operating theatres worldwide.
The lead product is a synthetic polymer comprising individual strands of nanofibers, and was developed to repair brain and spinal cord injuries, but MacEwan thinks it could also be used to mend hernias, fistulas and other injuries.
Currently, the surgical meshes used to repair the protective membrane that covers the brain and spinal cord are made of thick and stiff material, which is difficult to work with. The lead nanofiber mesh is thinner, more flexible and more likely to integrate with the body's own tissues, says MacEwan. Every thread of the nanofiber mesh is thousands of times smaller than the diameter of a single cell. The idea is to use the nanofiber material not only to make operations easier for surgeons to carry out, but also so there are fewer post-op complications for patients, because it breaks down naturally over time.
Researchers at the Polytechnic Institute of New York University (NYU-Poly) have recently demonstrated a new way to make nanofibers out of proteins. Writing recently in the journal Advanced Functional Materials, the researchers say they came across their finding almost by chance: they were studying certain cylinder-shaped proteins derived from cartilage, when they noticed that in high concentrations, some of the proteins spontaneously came together and self-assembled into nanofibers.
They carried out further experiments, such as adding metal-recognizing amino acids and different metals, and found they could control fiber formation, alter its shape, and how it bound to small molecules. For instance, adding nickel transformed the fibers into clumped mats, which could be used to trigger the release of an attached drug molecule.
The researchers hope this new method will greatly improve the delivery of drugs to treat cancer, heart disorders and Alzheimer's disease. They can also see applications in regeneration of human tissue, bone and cartilage, and even as a way to develop tinier and more powerful microprocessors for use in computers and consumer electronics.