M) Create shift schedule of work over 3 day 20.00-08.00 with two 30 minutes breaks

In the section of Work Schedules the named interval with 3 different intervals, for example: 20:00-23:00, 23:30-3:30, 4:00-8:00 is added, we choose the corresponding transitions, we add the shift scheme of work with 6 days of shift: the first 3 we appropriate earlier created named interval. In a tab of Work Schedules the new schedule of work is added and we choose our replaceable scheme.

n) Set parameter “Do not take accound breach exit early for 5 minuts

In “Work schedule” section choose “Work schedule” subsection, Here you can click on icon “Report Settings” and in new window choose one of the parameters. In our task we choose “Do not take accound breach exit early for 5 minutes”

O) Create access schedule which allows input 30 min earlier start of work and exit no later than 30 min.

In Time zones section, we choose any time zone, and we specify the beginning of a time interval of 30 min earlier start of work and the end - 30 min later start of work. Further for necessary schedule of access we appropriate this time zone.

P) Deliver access card to all employees. Establish term of card action till end of 2013

In section “employees access” there are the list of employees where you can choose person. Then click “issue the card” and write down the card number. Here we can establish the limit time of card using. Second way, On the list chose one employee, and under the list there are information about employee`s card. Here you may change information about cards using time.

Q) Allow access to rooms according created access schedule

In section “employees access” choose one employee then you can see under the list information about employee`s card and there you may establish in which room he has access with this card.

Describe your order of projecting according to the next assignments

a) Configure controller PERCo-CT/L04 for manage lock.

Using crossing points on ХР3.1 socket you can configure controller PERCo-CT/L04 for control of the lock.

B) Change IP-address of controller to 10.0.142.5

It is necessary to exclude the controler from a configuration, to press Change of network settings icon, in the field the IP address we write 10.0.142.5 and press the OK button. Thus, it is necessary that the subnet 10.0.0.0 existed on the computer.

C) Install on reader Wiengard26 protocol.

D) Turn on global control of zoning.

Include function of local zonality (Antipass). Establish a tag External protection against transfer of identifiers (Global Antipass) in the section Configurator on a tab Parameters

E) Configure one of additional exits as alarm generator

In Configurator section choose one of additional exits and in the field Type it is chosen the alarm Generator.

F) Create structural scheme of rooms and place arrangement on mnemonic.

In the section of the Room and Mnemoscheme in a tab of the Room we add rooms and appropriate them controlers and devices, then in the Mnemoscheme tab we create the new scheme, press an editing Mode icon, further to Arrange devices on the scheme. After end we press by the Finish Editing button.

G) Create structure of subdivision and take it for employee

Date: 2015-12-11; view: 874