Home Random Page


CATEGORIES:

BiologyChemistryConstructionCultureEcologyEconomyElectronicsFinanceGeographyHistoryInformaticsLawMathematicsMechanicsMedicineOtherPedagogyPhilosophyPhysicsPolicyPsychologySociologySportTourism






L) Saturday, Sunday is a weekend. Include control of breach during working day

Describe your order of projecting according to the next assignments

a) Create schedule of automatic reserve DB coping on every Monday at 02:00.

To create automatic reserve copy, we choose the “backup database”. In this partition you can schedule automatic backup of database on any day of the week. So, we select day – Monday, click the icon “Add”(+). And we select retention range, from 02:00 to 03:00, and click the icon “OK”. And click the icon “Save the schedule”. Every Monday from 2 o’clock to 3 o’clock will create backup of database (copy of database)

b) Configure controller PERCo-CT/L04 for manage lock.

Using crossing points on ÕÐ3.1 socket you can configure controller PERCo-CT/L04 for control of the lock with possibility of use of controllers of the second level.

c) Include on controller PERCo-CT/L04 ability to use second level controller.

Using crossing points on ÕÐ3.1 socket you can configure controller PERCo-CT/L04 for control of the lock with possibility of use of controllers of the second level.

d) Change IP-address of controller to 192.168.1.105
It is necessary to exclude the controller from a configuration, to press Change of network settings icon, in the field the IP address we write 192.168.1.105 and press the OK button. Thus, it is necessary that the subnet 192.168.0.0 existed on the computer.

E) Install on reader Wiengard26 protocol.

In Configuration section press by left mouse the main Controller “Secure system ” and choose at the right side protocol Wiengard26.

f) Change name of readers of controller to Input/Output

In section Configurator we choose the necessary controller, pass to its readers, and the field Current Name enter the names as “Input ”, ”Output”.

g) Configure one of additional exits as alarm generator
In the section Configurator we choose the necessary controller, pass to its readers. Then in the same place choose one of additional exits and in the field Type it is chosen the alarm Generator.

H) Create structural scheme of rooms and place arrangement(ðàçìåñòèòü óñòðîéñòâà) on mnemonic.

In the section of the Room and Mnemoscheme in a tab of the Room we add rooms and appropriate them controllers and devices, then in the Mnemoscheme tab we create the new scheme, press an editing Mode icon, further to Arrange devices on the scheme. After end we press by the Finish Editing button.

I) Create structure of subdivision and take it for employee

Choose section “Registration data”. There you can create a subdivision. After creating go to the section Empolyees, choose employee and choose “Editing” icon. Here you can give some subdivision for chosen employee.

j) Create record card of employee – Az Semen Semenovich and Buka Petr Petrovich

In section “ access” choose subsection “Access of employees”. In the list of employees choose person-Az Semen Semenovich. Then click “issue the card” and write down the card number.

k) Create week’s schedule of work from 08.00 till 17.00 breaks to lunch from 12.00 till 13.00



In “Work schedule” section click “+” (add) and write the name and description if needed. Then write the working time from 08:00 till 12:00 and 13:00 till 17:00. And click OK and SAVE

l) Saturday, Sunday is a weekend. Include control of breach during working day

In “Work schedule” section exists work area called “Work scheme”. There you can choose scheme of working days. Here you see only “Never”. Because of Sunday and Saturday-weekend, we just leave it as is. Other days may contain some other information


Date: 2015-12-11; view: 868


<== previous page | next page ==>
topic 10. travelling. | M) Create shift schedule of work over 3 day 20.00-08.00 with two 30 minutes breaks
doclecture.net - lectures - 2014-2024 year. Copyright infringement or personal data (0.01 sec.)