Setup of Zyxel Prestige 128L bridge-router

Before to start device setup, it is necessary to start program Hyper Terminal on the controlling terminal(see the start path in Figure 2.4).

Figure 2.4 – The start path program Hyper Terminal

Further it is necessary to enter setup of Hyper Terminal program(see Figure 2.5)

To set a connection name (any quantity of characters).

Figure 2.5 – Hyper Terminal start program

Select COM1port from the dropping out list “Connect using:”

Select from the dropping out list “Bits per second:” speed of connection – 9600kb/s.

Select from the dropping out list “Flow control”: flow management – Hardware.

After execution of above mentioned operations we get to a window of link with SMT (System maintenance terminal) a-firmware to handle Zyxel Prestige 128L.

At power up Prestige will make some internal tests and initializes IDSL line. After initialization Prestige asks to press the Enter key to continue as follows in the Figure 2.6.

Figure 2.6– Hyper Terminal start program

When pressing ENTER, Prestige will display registration and ask to type the password, as shown in Figure 2.7. The password is 1234. Press Enter after password input.

Figure 2.7– Hyper Terminal start program

Then you will get to the main menu (Figure 2.8).

Figure 2.8– Prestige main menu

As at first we set up the bridge for so to operate in a bridge mode we will be interested only in settings up concerning data link and physical levels.

When the modem is set up in a router mode for operation we will not be interested only in setting up concerning data link and physical levels, but also in network one.

Let's use 1, 2, 3 and 11 items of the main menu (see Table 2.1).

Table 2.1 – Main SMT menus

N	Manu name	Description
	General Setup	Customisation of the common parametres and inclusion of Routing for certain protocols and transmission on the bridge.
	WAN Port Setup	IDSL configuration
	Ethernet Setup	Ethernet configuration
	Remote Node Setup	Customisation of a remote node for connection of Local area networks, including connection to the Internet. Prestige supports four remote nodes.

Attention!!! All operations generated in a terminal window are instantly transferred to the modem, i.e. you "are" in the modem operating system already. It "understands" only pressing the keys of thekeyboard. Further familiarize attentively with rules of input of commands and data. • Transition to other menu.To transit to the necessary submenu, enter its number under the current menu and press the Enter key • Return to the previous choice.To return to the previous menu, press Escape key. A unique exception is the main menu where the unique way of return is to input 99 for an output from SMT. • Cursor movement.Being in the menu, to transit to the next field, press the Enter key (carriage return). To move in fields it is possible to use keys with arrows Upand Downfor the transition to the previous and following choices accordingly. • Information input.There are two types of filled to be fields. It is necessary to enter the demanded information in the field of the first type. The field of the second type gives the possibility of a choice from the several preinstalled values. In the second case, exhaustive search of possible values is carried out by means of a key of SPACE BARblank. • Mandatory fields.Some SMT fields are important for configuration Prestige. In the given fields the sign «?» is put down initially, showing that the information should be entered without failure before storing of the menu. • N/A Fields. There is N/A in some SMT. It means, that the given option is unavailable. • Configuration storage.It is possible to store the configuration by pressing the ENTERkey when a message appears: Press ENTERto confirm or ESC to cancel: Storing of screen data, returns as a rule to the previous menu.

Menu 1 – General Setup

The given menu contains management and common system information. Enter 1 to the main menu for access to menu 1 – «General Setup» (Figure 2.9).

Figure 2.9– Menu 1 – «General Setup»

1 System Name–Select a descriptive name for Prestige (for the identification purposes), Jet1. The name can include to 8 alphanumeric characters. Blanks in the name are not allowed. The dash sign «–» and sign to underline «_» are allowed.

2 Location– Enter geographical Prestige layout (to 31 characters), e.g., Odessa_ONAT

3 Contact Person Name– Enter the person’s name, who is responsible for Prestige (to 8 characters), e.g., Ivan_Ivanych. Location fields and Contact Person are not mandatory.

Date: 2015-12-24; view: 950

<== previous page	\|	next page ==>
Common description of Zyxel Prestige 128L bridge-router	\|	Use 10Base-T in operation.

doclecture.net - lectures - 2014-2024 year. Copyright infringement or personal data (0.007 sec.)