Home Random Page


CATEGORIES:

BiologyChemistryConstructionCultureEcologyEconomyElectronicsFinanceGeographyHistoryInformaticsLawMathematicsMechanicsMedicineOtherPedagogyPhilosophyPhysicsPolicyPsychologySociologySportTourism






THE INSTRUMENT PANEL

Navigation aids, telemetric equipment, audio system features and the standard instruments are all fighting for space on the instrument panel (IP). This creates a challenge for interior designers and engineers who need to keep the IP simple so that the driver is not distracted by too many buttons and instruments. Customers also equate a spacious interior with luxury – another reason why the IP shouldn’t look overcrowded.

Designers deal with the problem in various ways. They reduce the size of ‘space-eaters’ such as heating and cooling systems, or even remove them completely from the IP by putting them under the seat or in the boot. They also put many functions, such as station pre-set buttons for audio systems, on touch screens, which save space on the IP. But there is still the danger of overcrowding the screen, which could distract the driver and thus cause an accident. Another problem is the position: the touch screen needs to be located high on the dashboard so that the driver can use it easily while driving. But if it is too high it can be hard to read because of reflections and the sun ‘washing out’ the screen.

Some engineers see voice recognition as a way to get rid of many manual controls and to simplify the IP. But voice recognition can also be overused. There needs to be an optimal balance between visual displays and voice instructions, so that the driver can deal safely with all the information he or she receives.


  1. Complete the sentences with the information from the text above.

a) ……… are all fighting for space on the IP.

b) Customers also equate ………

c) Designers reduce the size of ………

d) They also put many functions ……… on touch screens.

e) Another problem is the position: ………

f) Some engineers see voice recognition ………

 

2. Translate the sentences into Ukrainian:

a) The front suspension has been stiffened to produce more precise steering at high speeds.

b) We have also increased the size of the disc brakes for a shorter braking distance.

c) I also noticed that the press release says there is improved fuel consumption.

d) Firstly, we have enhanced the Cd value with a new design.

e) We have also reduced the weight of the car by over 50 kilos by using light-weight materials.

f) We have introduced a start-stop automatic so that the engine cuts out if you stand still for more than three seconds and starts again when you take your foot off the brake.

g) This has a positive effect on the running costs of his car and on the resale value.

h) We have also increased the boot capacity to make the car more practical for families and sports people.

 

3. Match the words from these two boxes to make expressions:

Urban, Cd, running, resale, braking, boot, front, disk, kerb Costs, consumption, brakes, capacity, distance, suspension, value, value, weight

 

4. Match the expressions above with the following definitions:

a) A measure of the car’s wind resistance or drag coefficient.



b) The amount you spend on petrol, tax, maintenance, …

c) A volume of the boot.

d) Haw much fuel you need driving around town.

e) Brake system which uses a caliper and rotor, or disc, to stop or slow a vehicle.

f) How much you can expect to get if you sell the car after three years.

g) The connection of the axles by springs and dampers to the car body which prevents occupants from feeling road shocks.

h) The distance between putting your foot down on the brake and the car stopping.

i) How much the car weighs when there are no passengers in it and with half a tank of fuel.

5. Do you agree that there will be no more switches, only voice control? Will the car be made of self-cleaning materials? Will the sensors in the car prevent accidents? Would you like to be able to do most of the tasks you usually do in your office – in the car?

Text 24.

ALUMINUM – THE METAL OF THE YEAR

With the launch of the A2, Audi AG introduced the first vehicle in the world to have a volume-built all-aluminum body. In 1996, series production of the A8 began. The A8 is the first luxury limousine made of aluminum and the Audi plant produces 20 000 vehicles a year. The A8 combines high strength with low weight. This is the lightest car in the luxury class. The third-generation Audi Space Frame now has fewer components than its predecessors, which makes it easier to build the car in large quantities.

Other car makers are also starting to take aluminum seriously. As engine sizes have increased, cars have become more top-heavy. Using aluminum for the bonnet and front wings helps to get a better weight distribution between front and rear axles. Another advantage of aluminum is that it is cheaper to recycle than steel. This will be an important consideration in the future when the EU introduces tougher recycling regulations.

But there are drawbacks to using aluminum. Replacing steel with aluminum is expensive; an aluminum body costs twice as much as a steel one. Not only are production processes expensive, they are also difficult to implement. Because aluminum is more brittle and tears more easily than steel, it can only be formed when it is in an unhardened state. Furthermore, aluminum used for the outer parts of the car, such as the wings and the doors, needs to be thicker than steel because it doesn’t have the same stiffness. The dent-resistance of aluminum is also less than that of steel.

On the plus side, aluminum doesn’t rust like steel, and in car crashes it has a higher energy absorption rate, which increases the car’s active safety.

1. Answer these questions:

a) What are the advantages and disadvantages of using aluminum?

b) What kind of car materials do you think will be used in the future?

c) What materials are used in car manufacturing?

d) What are the EU’s recycling targets for 2015? Do you think car makers will have trouble reaching them?

2. Complete the sentences about materials and their properties with words from the box:

Shatterproof, light, corrosion-resistant, durable, elastic, natural, rigid, flammable, malleable, heat-resistant.

a) Wood is very often used in interiors because it looks _______ and warm.

b) Aluminum and magnesium are important for car makers because they are _______ and therefore good for weight-saving.

c) Safety regulations require that the foam used in car seats shouldn’t be _______.

d) Rubber should be able to withstand great temperature differences while staying _______. In other words, it shouldn’t become brittle.

e) Windscreens are made of a special _______ glass to protect drivers in accidents.

f) Fabrics used in cars need to be _______ and not look old too quickly.

g) Steel is used for load-bearing parts because it is _______.

h) Sheet metal is used for large car parts because it is _______ and dent-resistant.

i) Ceramic, which is _______, is used in the catalytic converter because of the very high temperatures.

j) Aluminum is ideal for bumpers and other body parts because it is _______.

 

 


Date: 2015-12-17; view: 3438


<== previous page | next page ==>
THE HISTORY OF THE AUTOMOBILE | The United Kingdom and its Component Parts
doclecture.net - lectures - 2014-2024 year. Copyright infringement or personal data (0.009 sec.)